Filter
Top Products
15
PV
®
115D
Class-D Powered Two-Way Sound Reinforcement Speaker System
Thank you for purchasing the Class-D powered PV
®
115D. The PV
®
115D is a two-way self-powered sound
reinforcement system based on a 15” Pro 15 woofer and a RX
™
14 titanium diaphragm dynamic compression
driver mounted on a 60 degree by 40 degree coverage CD horn. The PV
®
115D features a Class-D power section
that provides up to 800 peak available watts of power for the system, with DDT
™
compression. Input jacks
provided are a balanced input XLR and a 1/4” phone combo jack, with a volume control and a Contour switch for
boosting lows and highs.
FEATURES
• Two-way powered sound reinforcement enclosure
• Peavey
®
exclusive 15” heavy-duty woofer with 2 3/8” voice coil & 50 oz. magnet
• RX
™
14 titanium diaphragm compression driver, with 1.4" titanium diaphragm
• Constant directivity tweeter horn, 60° X 40°
• Class-D powered system with up to 800 W total peak available power
• DDT
™
compression/anti-clipping protection
• Signal input via combo female XLR/ 1/4” phone jack, providing balanced operation
• Power amp output jack available to power another passive speaker
• Contour switch provides bass and treble lift
• Heavy-duty crossover network with high frequency driver protection
• Carpet covered trapezoidal enclosure
• Steel handles and protective corners
• Full-coverage heavy-duty perforated steel grill with powder coat finish
• Steel pole mount adaptor
• T-Nut speaker mounting
Description
The Peavey PV
®
115D is a powered, two-way, sound reinforcement speaker system engineered to provide very
high levels of performance in a compact powered loudspeaker. The PV
®
115D is capable of generating peak SPL
up to 121 dB. The lightweight yet rugged carpet covered enclosure with stand mount cup facilitates portable
use for live music or PA sound. The trapezoidal cabinet has steel handles on either side for ease of portability,
and four rubber feet for floor use, while a stand-mount adaptor on the bottom allows for easy speaker stand
mounting. Black steel corners provide road protection to the cabinet. A black full-length powder-coated
perforated steel grille provides driver protection and a professional appearance.
The PV
®
115D speaker system includes an internal power amp to drive its own speakers, as well as an amplifier
output jack to drive another (passive) loudspeaker system. It supplies up to 400 watts peak available power
to the internal speakers, and up to 400 watts peak available power to an external 8 ohm speaker system,
for a total of 800 watts peak available power. The amplifier is equipped with DDT
™
compression, providing
protection from excessive amplifier clipping and the consequent distortion. A balanced input to the preamp/EQ
electronics consists of one combo female XLR and 1/4” TRS phone jack. A Contour switch provides some bass
and treble lift when used as a background music source, etc. A Link Out 1/4” phone jack provides a pre-level
send for linking multiple units together, to be controlled by a single volume control at a master unit.
Applications
Aside from its primary use as a sound reinforcement system, the Peavey PV
®
115D has a variety of applications
such as public address, side fill system, karaoke or musical playback. A typical signal source for the line-level
inputs of the Peavey PV
®
115D would be a sound reinforcement mixing console (mixer) or the output from a CD
player, MP3 player or tape deck.