Filter
Top Products
16
B O T T O M p a n e l
1
VOLTAGE SELECTOR SWITCH
The PV
®
115D has a voltage selector switch to allow switching between an input power voltage range from
100VAC to 120VAC to a range from 220VAC to 240VAC, all at either 50 or 60 cycles per second (Hz). It should be
set to the proper voltage for your country out of the box. However, world conditions are such that some areas
have power line voltages differing from the voltage used by the majority of any given locale.
Be sure to check the position of the voltage selector switch to see that it matches the power line voltage used
locally. If it does not match, then to change the voltage to the correct one, follow the steps outlined below.
Changing the Voltage Range of the PV
®
115D
First, make sure the PV
®
115D is disconnected from the power line, and that the power switch (3) is in the OFF
position.
21 2a 3 4