Filter
Top Products
27
Reset
When the unit hangs up, you can reset it.
1 Open the MAP/SD card socket cover.
2 Press the RESET button with a ball-point
pen or similar tool.
Tip
When the unit is reset, all the settings remain •
unchanged.
Remove the unit
To repair, replace fuse, or replace the unit,
remove it from the dashboard.
1 Screw off the four (4) screws on the left/
right side of the unit.
2 Pull the unit out from the dashboard.
10 Others
Listen to other devices
Tip
When air conditioning information changes, •
the air conditioning information interface will
be displayed for 10 seconds.
You can connect an external audio/video device
to the unit.
1 Connect the device to the unit with the
supplied AV cable.
2 Tap to display the main menu.
3 Tap [AV-IN1].
4 Play the connected device (see the
instructions manual of the device).
Tip
If you connect the system to other audio •
device through the REAR OUT L/R connector
(see “Connect wires” section), tap [AV-IN2] to
listen to that device.
AV IN
English
EN