Filter
Top Products
21
Adding and clearing TV channels
manually
With this function you can block TV channels on which reception is
not possible. They will be skipped when the CHANNEL q and
CHANNEL r buttons are selected.
ATTENTION !
The allocation (TV channel name to the TV channel) will be done from
the TV Guide On Screen
™
System automatically. Therefor you cannot
select this function.
a I can not select the line 'Add/Delete Channels'
To switch the channels on or to change the allocation manually proceed
as follows:
- Press TV GUIDE . The 'LISTINGS' screen appears.
- Press repeatedly A to select the menu bar at the top of the screen.
- Select with D or C 'SETUP'.
- Select with B or A 'Change channel display' and confirm
with OK .
- Select with B , A the TV-Station. With O , N you can switch
one page for or back.
- Enter in the right colum the TV channel with the number buttons
0..9 . You can switch the channel on or off with the green function
button.
- End with TV GUIDE .
- Switch off the Recorder with STANDBY m .
The new settings will be taken if the Recorder is switched on again.
Preparation:
•) Switch on the TV set, and if necessary, select the channel for the DVD
recorder (channel 3 or 4).
•) Switch on the DVD recorder.
1 Press the BROWSER HDD button and then the SYSTEM
MENU button on the remote control.
P The 'SYSTEM MENU' appears.
2 Select 'Set up' using B .
3 Press C to select 'System'.
4 Select the line 'Installation' using B and confirm with C .
P A message appears on the screen that the change of this
setting will flush the 'Time Shift Buffer'.
O If the 'Time Shift Buffer ' contains important recordings, save
them with the REC/OTR n button first. Read additional
information to the 'Time Shift Buffer' in the chapter 'The Time
Shift Buffer'.
5 Select 'Yes' with D and confirm with OK .
O If the message window was closed, confirm the line with
C again.
6 Select 'Add/Delete Channels' using B or A and confirm with
C .
Installation
Add/Delete Channels
...
• Channel 001 Add
Channel 002 Add
Channel 003 Delete
Channel 004 Delete
Channel 005 Delete
Channel 006 Delete
...
To exit press
SYSTEM MENU
7 Using B or A select the TV channel that you want to add or
delete.
8 Use C and D to select 'Add'or'Delete'.
9 Repeat steps
7 to 8 until you have added or deleted all the TV
channels you want.
0 To store, press OK .
A To end, press SYSTEM MENU .
Setting the language
For the basic setting of DVD playback, you can select the language for
the subtitles and the audio language.
Please note that with some DVDs the audio language and/or subtitle
language can be changed only via the DVD menu.
For recording, you can also switch the TV channel sound between
stereo and an additional language (Secondary Audio Program SAP).
Preparation:
•) Switch on the TV set, and if necessary, select the channel for the DVD
recorder (channel 3 or 4).
•) Switch on the DVD recorder.
1 Press the BROWSER HDD button and then the SYSTEM
MENU button on the remote control.
P The menu bar appears.
2 Select '
A
' symbol with D or C .
3 Select '
u
' with B or A and confirm with the C button.
Language
Playback audio English
Subtitle English
Menu English
Additional installation features