Filter
Top Products
65
- Disconnect the recorder's power cord.
- Hold down N on the DVD Recorder while reconnecting the power
cord. 'PRO' (progressive scan) appears on the display.
- If you want to switch back, hold down N until 'PRO' disappears
from the display. The DVD Recorder is switched to 'Interlaced.'
Sound settings
You can select the settings in this menu depending on which audio
outputs are used.
If you only use only the analog audio outputs (red and white jack
AUDIO L/R (OUT 2) , AUDIO L/R (OUT 1) ), select the setting
'Off' in the 'Digital output' menu.
Sound
Digitaloutput All
Analog output Stereo
Night mode Off
'Digital output'
You can select one of the following settings for devices that are
connected to the COAX OUT or OPTICAL OUT jacks:
O 'All'
Dolby Digital and DTS signals are fed unaltered to the digital
output. MPEG-2 multi-channel signals are converted to PCM
(Pulse Code Modulation).
For receivers/amplifiers with digital multichannel
decoders.
O 'PCM only'
Digital and MPEG-2 multi-channel signals are converted to
PCM (Pulse Code Modulation). For receivers/amplifiers
without digital multichannel decoders.
O 'Off'
Digital output switched off.
For devices with analog audio input.
'Analog output'
You can select one of the following settings for devices that are
connected to the analog audio output AUDIO L/R (OUT 2) or
AUDIO L/R (OUT 1) :
O 'Stereo'
For devices without DolbySurround or TruSurround. Use this
setting if the DVD recorder is only connected to a stereo TV
set.
O 'Surround'
Dolby Digital and MPEG-2 multi-channel are mixed down to a
Dolby Surround-compatible two-channel output signal.
For devices with Dolby Surround / Pro Logic Decoder .
'Night mode'
Night mode optimizes the sound for playback at low volume. You are
therefore less likely to disturb your neighbours. This only works with
Dolby Digital audio on DVD video discs.
Language settings
You can select the following settings in this menu:
Language
Playback audio English
Subtitle English
Menu English
'Playback audio'
Playback audio language.
'Subtitle'
Subtitle language
'Menu'
Screen menu language
Additional user preferences