Philips MCM129 Car Stereo System User Manual


 
9EN
5 Listen to radio
Tune to a radio station
Tip
Position the antenna as far as possible from TV, VCR, or
other radiation source.
For optimal reception, fully extend and adjust the
position of the antenna.
1 Press SOURCE repeatedly to select the
FM tuner source.
» [tuner] (tuner) is displayed.
2 Press and hold / for two seconds.
» The radio tunes to a station with
strong reception automatically.
3 Repeat step 2 to tune to more stations.
To tune to a weak station:
Press / repeatedlyuntilyoundoptimal
reception.
Program radio stations
automatically
Note
You can program a maximum of 20 preset FM radio
stations.
In FM tuner mode, press and hold PROG for
two seconds.
» [AUTO] (auto) is displayed.
» The device stores all available FM radio
stationsandbroadcaststherstavailable
station automatically.
Program radio stations
manually
Note
You can program a maximum of 20 preset radio
stations.
1 Tune to a radio station.
2 Press PROG to activate program mode.
» The preset number is displayed.
3 Press PRESET +/- to select a number, and
then press PROGtoconrm.
» Thefrequencyofthepresetstationis
displayed.
4 Repeat steps 2-3 to program more
stations.
Tip
To overwrite a programmed station, store another
station in its place.
Select a preset radio station
In FM tuner mode, press PRESET +/- to select a
preset number.