Philips MCM129 Car Stereo System User Manual


 
10 EN
6 Other features
Listen to an external device
You can listen to an external device through
this unit.
1 Press SOURCE repeatedly to select the
AUX source.
2 Connect an MP3 link cable (not supplied)
between:
• AUDIO IN jack (3.5 mm) on the unit,
• and the headphone jack on an external
device
3 Start to play the device (see the device
user manual).
AUDIO IN
7 Product
information
Note
Product information is subject to change without prior
notice.
Specications
Amplier
Maximum Output
Power
5 W RMS
FrequencyResponse 60-16 kHz, ±3 dB
Signal to Noise Ratio >50 dBA
Aux Input 0.5 V RMS 20 kohm
Speakers
Speaker Impedance 3 ohm
Speaker Driver 3.5" full range
Sensitivity >82 dB/m/W
Disc
Laser Type Semiconductor
Disc Diameter 12 cm/8 cm
Support Disc CD-DA, CD-R,
CD-RW
Audio DAC 24 Bits / 44.1 kHz
Total Harmonic
Distortion
<1%
FrequencyResponse 60 Hz -16 kHz
(44.1 kHz), ±3 dB
S/N Ratio >50 dBA