Filter
Top Products
! OFF – Turn the sound muting/attenuation
off
Notes
! The sound is turned off, MUTE is displayed
and no audio adjustments are possible.
! The sound is attenuated, ATT is displayed and
no audio adjustments, except volume control,
are possible.
! Operation returns to normal when the phone
connection is ended.
Entering PIN code for Bluetooth
wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is 0000, but you
can change this in this function.
! With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1 Touch NEXT on the initial menu.
2 Touch PINCODE INPUT.
PIN code input display appears.
3 Touch 0 to 9 to input the PIN code of
your Bluetooth audio player.
# To cancel the inputted numbers, touch C.
4 After inputting PIN code (up to 16 di-
gits), touch ENTER.
The PIN code you entered is stored in this sys-
tem.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch DIGITAL ATT to switch the digital
attenuator setting.
Touch DIGITAL ATT repeatedly until the de-
sired setting appears in the display.
! HIGH – High quality sound
! LOW – Minimize distortion sound
Resetting the audio functions
You can reset all audio functions except vo-
lume.
! Only when the multi-channel processor
(e.g., DEQ-P8000) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch AUDIO RESET.
3 Touch RESET.
4 Touch RESET again to reset audio func-
tions.
# To cancel resetting the audio functions, touch
CANCEL.
Operating this unit
En
40
Section
03