Filter
Top Products
47
DEH-2130R,2100R
(4) Display of Operational Status (CPOINT) during Setup
Status No. Contents Protective action
01 Carriage move to home position started. None
02 Carriage is moving toward inner diameter. Specified 10 seconds has been passed or failure
on home switch.
03 Carriage is moving toward outer diameter. Specified 10 seconds has been passed or failure
on home switch.
05 Carriage outer diameter feed (1 second) in progress. None
11 Setup started. None
12 Spindle rotation and focus search started. None
13 Waiting for focus close (XSI=Low). Specified focus search time has been passed.
14 Waiting for focus close (FOK=High). (After AGC) Specified focus search time has been passed.
15 Waiting for focus close (FOK=High). (Before AGC) Specified focus search time has been passed.
16 Rough AGC in progress. Off focus.
17 Setup (1/2) before T balance adjustment is started. Off focus.
18 Setup (2/2) before T balance adjustment is started. Off focus.
24 T balance adjustment (1/2). Off focus.
25 T balance adjustment (2/2). Off focus.
26 Standing by after spindle rough servo is over. Off focus.
27 Setup before RF AGC (first) is started. Off focus.
28 RF AGC (first) in progress. Off focus.
29 Setup before RF AGC (second) is started. Off focus.
30 RF AGC (second) in progress. Off focus.
31 Tracking close in progress. Off focus.
32 Standing by after tracking is closed. Off focus.
33 Focus AGC started. Off focus.
34 Focus AGC in progress. Tracking AGC started. Off focus.
35 Tracking AGC in progress. Off focus.
Spindle processes applicable servo.
36 Check of MIRR and LOCK pin. RF AGC in progress. Off focus. Spindle not locked.
CRG close in progress. Check of sub-code. Sub-code unreadable.
(5) Display Examples
1) During Setup (When status no. = 11)
TRK No. MIN. SEC.
11 11' 11"
2) During Operation (TOC read, TRK search, Play, FF and REV)
The same as in the normal mode.
3) When a Protection Error Occurred
Switch to the following displays (A) and (B) using the [BAND] switch:
(A) Error occurrence timing display in absolute time.
An example: Error occurred in 12th tune at 34'56" in absolute time.
TRK No. MIN. SEC.
12 34' 56"
(B) Error No. display
An example: Error #40 (Off focus is detected)
ERROR-40