Filter
Top Products
4 Press M.C. and hold until the customizing
illumination color setting appears in the dis-
play.
5 Press M.C. to select the primary color.
R (red)—G (green)—B (blue)
6 Turn M.C. to adjust the brightness level.
Adjustment range: 0 to 60
# You cannot selecta level below20 for all threeof
R (red),G (green), andB (blue) at thesame time.
# You can alsoperform the sameoperation on
other colors.
Note
You cannot create a custom illumination color
while SCAN, WARM, AMBIENTor CALM is se-
lected.
About MIXTRAX
Only for DEH-X3500UI and DEH-X35UI
MIXTRAX technology is used to insert avariety
of sound effects in between songs, allowing you
to experience your music as a nonstop mixcom-
plete with visual and lighting effects.
Notes
! Depending on the file/song, sound effects
may not be added.
! MIXTRAX includes a MIXTRAX flashing color
mode that when switched on turns theflash-
ing colors on and off in time withthe audio
track. If you find the feature distracting while
driving, please turn MIXTRAX off. Refer to Op-
erations using the MIXTRAXbutton on page 6.
MIXTRAX menu
Only for DEH-X3500UI and DEH-X35UI
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select MIXTRAX.
3 Turn M.C. to select the MIXTRAX func-
tion.
Once selected, the following MIXTRAX functions
can be adjusted. The function is enabledwhen
MIXTRAX is on.
SHT PLAYBACK(short playback mode)
You can selectthe length of theplayback time.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
1.0MIN (1.0minute)—1.5MIN (1.5minutes)—
2.0MIN (2.0minutes)—2.5MIN (2.5minutes)
—3.0MIN (3.0minutes)—OFF (off)
! Turn thisoption OFF ifyou want toplay a selec-
tion allthe way through fromstart to finish.
FLASH AREA(flash area)
You can selectareas for flashing colors.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
KEY/DISPLAY (keyand display)—KEY (key)—
OFF (off)
! When OFFis selected, thecolor set underIL-
LUMI isused as the displaycolor.
FLASH PATTERN (flashpattern)
You can selectflashing color patterns.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
You can selectany one ofthe options inthe fol-
lowing list:
! SOUND LEVEL1 to SOUND LEVEL6 –
Flashing colorswill flash on andoff in syn-
chronization withthe sound level ina
song. Selectthe desired mode.
! LOW PASS 1to LOW PASS6 – Flashing
colors willflash on and offin synchroniza-
tion withthe bass level ina song. Select
the desiredmode.
! RANDOM 1– The patternfor the flashing
colors israndomly selected fromthe sound
level modeand low passmode.
! RANDOM 2– The patternfor the flashing
colors israndomly selected fromthe sound
level mode.
! RANDOM 3– The patternfor the flashing
colors israndomly selected fromthe low
pass mode.
DISPLAY FX(display effect)
The MIXTRAXspecial effects displaycan be turned
on oroff.
1 Press M.C. toselect the desiredsetting.
ON (MIXTRAXspecial effects display)—OFF
(normal display)
CUT INFX (manual cut-ineffect)
You can turnon or off theMIXTRAX sound effects
while manuallychanging tracks.
1 Press M.C. toselect the desiredsetting.
ON (on)—OFF(off)
Initial menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold M.C. until the main menu
appears in the display.
3 Turn M.C. to change the menu option
and press to select INITIAL.
Once selected, the initial menu functionbelow
can be adjusted.
SP-P/O MODE(rear output and preoutsetting)
The rearspeaker leads outputand the RCA output
of this unitcan be usedto connect afull-range
speaker orsubwoofer. Select asuitable option for
your connection.
1 Press M.C. todisplay the settingmode.
2 TurnM.C. to selectthe desired setting.
You can selectany one ofthe options inthe fol-
lowing list:
! REAR/SUB.W –Select when thereis a full-
range speakerconnected to the rearspeak-
er leadsoutput and thereis a subwoofer
connected tothe RCA output.
! SUB.W/SUB.W –Select when there isa
subwoofer connecteddirectly to therear
speaker leadsoutput without anyauxiliary
amp andthere is a subwooferconnected
to theRCA output.
! REAR/REAR –Select when thereis a full-
range speakerconnected to the rearspeak-
er leadsoutput and the RCAoutput.
If there isa full-range speakerconnected to
the rearspeaker leads outputand the RCA
output isnot used, you mayselect either
REAR/SUB.Wor REAR/REAR.
System menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold M.C. until the main menu
appears in the display.
3 Turn M.C. to change the menu option
and press to select SYSTEM.
Operating this unit
12
Section
Operating this unit
En
02