Filter
Top Products
! The following functions are still accessible
from the unit even if the control mode is set to
CTRL iPod/CTRL APP.
— Pausing
— Fast forward/reverse
— Track up/down
— Repeat play (ONE/ALL/OFF)
— Random play (shuffle)
—
(list) to use iPod menu
— a to turn the iPod click wheel to the left
— b to turn the iPod click wheel to the right
! When the control mode is set to CTRL iPod,
operations are limited as follows:
— The function settings are not available.
— The browse function cannot be operated
from this unit.
Bluetooth Telephone
Connection menu operation
Important
Be sure to park your vehicle in a safe place and
apply the parking brake when performing this op-
eration.
1 Press and hold to display the con-
nection menu.
# You cannot operate this step during a call.
2 Turn M.C. to select the function.
After selecting, perform the following proce-
dures to set the function.
DEVICELIST (connecting or disconnecting a cellular
phone from the device list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
to connect/disconnect.
! Press and hold M.C. toswitch the BD address
and device name.
3 Press M.C. to connect/disconnect the selected
cellular phone.
If the connection is established, * is indicated on
the device name.
DEL DEVICE (deleting a cellular phone from the de-
vice list)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the name of a device you want
to delete.
! Press and hold M.C. toswitch the BD address
and device name.
3 Press M.C. to display DELETE YES.
4 Press M.C. to delete a cellular phone information
from the device list.
! While this function is in use, do not turnoff the
engine.
ADD DEVICE (connecting a new cellular phone)
1 Press M.C. to start searching.
! To cancel, press M.C. while searching.
2 Turn M.C. to select a device from the devicelist.
! If the desired device is not displayed, select
RE-SEARCH.
3 Press and hold M.C. toswitch the BD address
and device name.
4 Press M.C. to connect the selected cellular
phone.
! To complete the connection, check thedevice
name (DEH-7300BT) and enter the link code
on your cellular phone.
! PIN code is set to 0000 as thedefault. You
can change this code. Refer to PIN CODE(PIN
code input) on this page.
! If five devices are already paired, DEVICEFULL
is displayed and it is not possible to perform
this operation. In this case, delete a paired de-
vice first.
SPCL. DEV.(setting a special device)
Bluetooth devices that are difficult to establish a con-
nection with are called special devices. If your Blue-
tooth device is listed as a special device, selectthe
appropriate one.
1 Press M.C. to display the setting mode.
2 Use M.C. to select a special device.
Turn to change the menu option. Press to select.
! If five devices are already paired, DEVICEFULL
is displayed and it is not possible to perform
this operation. In this case, delete a paired de-
vice first.
3 Turn M.C. to display this unit’s device name, BD
address and pincode.
4 Use a cellular phone to connect to this unit.
! To complete the connection, check thedevice
name (DEH-7300BT) and enter the link code
on your cellular phone.
! PIN code is set to 0000 as thedefault. You
can change this code. Refer to PIN CODE(PIN
code input) on this page.
En
13
Section
02
Operating this unit
Operating this unit