Filter
Top Products
Rejecting an incoming call
1 When a call is received, press
.
Answering a call waiting
1 When a call is received, press M.C.
Switching between callers on hold
1 Press M.C.
Canceling call waiting
1 Press
.
Adjusting the other party’s listening volume
1 Press aor b while talking on the phone.
Turning private mode on or off.
1 Press B(BAND/ESC) while talking on the phone.
Switching the information display
1 Press
while talking on the phone.
! Press and hold
to scroll.
Notes
! If private mode is selected on the cellular
phone, hands-free phoning may not be avail-
able.
! The estimated call time appears in the display
(this may differ slightly from the actual call
time).
Menu operations identical
for function settings/audio
adjustments/initial
settings/lists
Returning to the previous display
Returning to the previous list (the folder one level
higher)
1 Press
.
Returning to the main menu
Returning to the top tier of list
1 Press and hold
.
Returning to the ordinary display
Canceling the initial setting menu
1 Press B(BAND/ESC).
Returning to the ordinary display from the list
1 Press B(BAND/ESC).
Tuner
Basic Operations
Selecting a band
1 Press B(BAND/ESC) until the desired band (F1,
F2, F3 for FM or MW/LW) is displayed.
Manual tuning (step by step)
1 Press cor d.
Seeking
1 Press and hold cor d, and then release.
You can cancel seek tuning by briefly pressing c
or d.
While pressing and holding c or d, you can skip
stations. Seek tuning starts as soon as you re-
lease c or d.
Note
This unit’s AF (alternative frequencies search)
function can be turned on and off. AF should be
off for normal tuning operation (refer to page 9).
Storing and recalling stations
for each band
Using preset tuning buttons
1 When you find a station that you want
to store in memory, press one of the preset
tuning buttons (1 to 6) and hold until the
preset number stops flashing.
2 Press one of the preset tuning buttons
(1 to 6) to select the desired station.
# You can also recall stored radio stations by
pressing a or b during the frequency display.
Switching the RDS display
RDS (radio data system) contains digital infor-
mation that helps search for the radio sta-
tions.
% Press
.
Program service name—PTY information—
Frequency
# PTY information and the frequency appear on
the display for eight seconds.
En
7
Section
02
Operating this unit
Operating this unit