Filter
Top Products
# If you do not operate the list withinabout 30
seconds, the display is automatically returned to
the ordinary display.
Note
You can also recallstations assignedto preset
tuning numbers by pushingMULTI-CONTROL up
or down during the channel display.
Switching the XM channel
select mode
You have two methods for selecting a channel:
by number and by category. When selecting
by number, channels in any category can be
selected. Select by category to narrow your
search down to only channels in a particular
category.
% Press S.Rtrv/SAT repeatedly to select
the desired channel select setting.
MODE CH NUMBER (channel number select
setting)—MODE CATEGORY (channel cate-
gory select setting)
# If you do not operate the function within about
eight seconds, the displayis automatically re-
turned to thechannel display.
Note
You can also perform this operation in the menu
that appears by using MULTI-CONTROL.
Selecting a channel in the channel
category
1 Select the channel select settings to
MODE CATEGORY.
Refer to Switching the XM channel select mode
on this page.
2 Push MULTI-CONTROL up or down to
select the desired channel category.
3 Push MULTI-CONTROL left or right to
select the desired channel in the selected
channel category.
Displaying the Radio ID
Channel number select setting
1 Select the channel select settings to
MODE CH NUMBER.
Refer to Switching the XM channel select mode
on this page.
2 Push MULTI-CONTROL left or right to
select RADIO ID.
# If you select another channel, display of theID
code is canceled.
# Display of theID code repeats displaying
RADIO ID and the ID code one after the other.
SIRIUS Satellite Radio tuner
Listening to SIRIUS Satellite Radio
You can use this unit to control a SIRIUS Satel-
lite Radio tuner, which is sold separately.
When the SIRIUS tuner is used together with
this unit, some operations differ slightly from
those described in the SIRIUS operation man-
ual. This manual provides information on
these points. For all other information on
using the SIRIUS tuner, please refer to the SIR-
IUS operation manual.
% Selecting a SIRIUS band
Band can be selected from SR1, SR2 or SR3.
% Selecting a channel
Push MULTI-CONTROL left or right.
# If you push and hold MULTI-CONTROL left or
right, you can increaseor decrease channel num-
ber continuously.
# You can also perform tuning from a desired
channel category. (Refer toSelecting a channel in
the channel category on page 42.)
Note
It may takea few seconds before you can hear
anything while this unitacquires and processes
the satellite signal when you change the source
to SIRIUS tuner or select a channel.
Available accessories
En
40
Section
06