Filter
Top Products
Notes
! To return to the previous display, press
DISP/BACK/SCRL.
! To return to the main menu, pressand hold
DISP/BACK/SCRL.
! To return to the playback display, press
BAND/ESC.
! DEVICE INFO is the same as that of the Blue-
tooth audio. (Refer to Displaying BD (Bluetooth
Device) address onpage 33.)
! If a cellularphone is connected to this unit via
Bluetooth wireless technology with HSP
(Head Set Profile), CLEAR MEMORY,
NUMBER DIAL and REFUSECALLS cannotbe
selected.
! If you do not operate functions other than
SEARCH PHONE, CONNECTION OPEN,
CONNECT PHONE, PH BOOK TRANSFER,
DISCONNECT PHONE, NUMBERDIAL and
CLEAR MEMORY within about 30 seconds,
the display automatically returnsto the ordin-
ary display.
Connecting a cellular phone
Searching for available cellular phones
1 Use MULTI-CONTROL to select
SEARCH PHONE in the function menu.
2 Press MULTI-CONTROL to search for
available cellular phones.
While searching, SEARCHING flashes. When
available cellular phones featuring Bluetooth
wireless technology are found, device name or
NAME NOT FOUND (if names cannot be ob-
tained) is displayed.
# If this unit fails to find any availablecellular
phones, NOT FOUND isdisplayed.
3 Turn MULTI-CONTROL to select a device
name you want to connect.
# You can also perform the same operations by
pushing MULTI-CONTROL up or down.
4 Press MULTI-CONTROL to connect the
selected cellular phone.
While connecting, CONNECTING flashes. To
complete the connection, check the device
name (PIONEER BT UNIT) and enter the link
code on your cellular phone. If the connection
is established, CONNECTED is displayed.
# PIN code is set to 0000 as the default.You
can change this code in the initial setting. Refer
to Entering PINcode forBluetooth wireless con-
nection on page28.
Using a cellular phone to initiate a
connection
1 Use MULTI-CONTROL to select
CONNECTION OPEN in the function menu.
2 Press MULTI-CONTROL to open the con-
nection.
ALWAYS WAITING flashes and the unit is
now on standby for connection from a cellular
phone.
3 Use cellular phone to connect to this
unit.
To complete the connection, check the device
name (PIONEER BT UNIT) and enter the link
code on your cellular phone. If the connection
is established, CONNECTED is displayed.
# PIN code is set to 0000 as the default.You
can change this code in the initial setting. Refer
to Entering PINcode forBluetooth wireless con-
nection on page28.
# If the connectionfails, ERROR is displayed. In
this case, try again from the beginning.
Disconnecting a cellular phone
1 Use MULTI-CONTROL to select
DISCONNECT PHONE in the function menu.
Device name of the connected phone appears
in the display.
2 Press MULTI-CONTROL to disconnect a
cellular phone from this unit.
After disconnection is completed,
DISCONNECTED is displayed.
Available accessories
En
36
Section
06