Filter
Top Products
Function name Operation
REPEAT
Refer to Selectinga repeat play
range on page 16.
However,the repeat play ranges
you can select aredifferent from
that of the built-in CDplayer. The
repeat play ranges of the multi-CD
player are:
! MCD– Repeat all discs inthe
multi-CD player
! TRACK– Repeat just the cur-
rent track
! DISC– Repeat the current disc
RANDOM
Refer to Playingtracks in random
order on page 16.
SCAN
Refer to Scanningfolders and
tracks on page 16.
PAUSE
Refer to Pausing playbackon page
16.
Notes
! To return to the previous display, press
DISP/BACK/SCRL.
! To return to the main menu, pressand hold
DISP/BACK/SCRL.
! To return to the playback display, press
BAND/ESC.
! If you select other discs during repeat play,
the repeat play range changes to MCD.
! If you perform track search or fast forward/re-
verse during TRACK, the repeat playrange
changes to DISC.
! After track or disc scanning is finished, nor-
mal playback of the tracks begins again.
Using compression and bass
emphasis
You can only use these functions with a multi-
CD player that supports them.
COMP (compression) and DBE (dynamic bass
emphasis) functions lets you adjust the sound
playback quality of the multi-CD player.
1 Use MULTI-CONTROL to select
COMP/DBE in the function menu.
# If the multi-CD player does not support
COMP/DBE, NO COMP isdisplayed whenyou at-
tempt to select it.
2 Turn MULTI-CONTROL to select the de-
sired setting.
OFF—COMP 1—COMP 2—OFF—DBE 1—
DBE 2
3 Press MULTI-CONTROL to determine
the selection.
# Even if the menu has been cancelled before
determination, operation is settled.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from the multi-CD
player magazine. After you have added your fa-
vorite tracks to the playlist, you can turn on ITS
play and play just those selections.
You can use ITS to enter and play back up to
99 tracks per disc from up to 100 discs. (With
multi-CD players sold before the CDX-P1250
and CDX-P650, up to 24 tracks can be stored
in the playlist.)
Creating a playlist with ITS programming
1 Play a CD that you want to program.
Push MULTI-CONTROL up or down to select
the CD.
2 Use MULTI-CONTROL to select
ITS MEMORY in the function menu.
3 Press MULTI-CONTROL to display the
setting mode.
4 Turn MULTI-CONTROL to select the de-
sired track.
5 Press MULTI-CONTROL to select
MEMORY.
# If DELETE is displayed,turn MULTI-CONTROL
to display MEMORY.
Available accessories
En
47
English
Section
06