Filter
Top Products
Before You Start
En
4
01
Section
Resetting the microprocessor
The microprocessor must be reset under the
following conditions:
• Prior to using this unit for the first time after
installation.
• If the unit fails to operate properly.
• When strange or incorrect messages appear
on the display.
• To reset the microprocessor, press the
RESET button on the unit with a pen tip or
other pointed instrument.
Output setting of the DVD player
When connecting Pioneer DVD player such as
DVH-P7050, make DIGITAL OUTPUT (Setting
for digital output) and OUTPUT SELECTION
(Setting digital and analog audio output) as fol-
lows:
Function Setting
DIGITAL OUTPUT Dolby D/LPCM
OUTPUT SELECTION 48KHz
Refer to the DVD player manual for details on
how to make those settings.
Important
• Be sure to set the correct position. If not, no
audio can be outputted.