Filter
Top Products
Using the position selector
One way to assure a more natural sound is to
clearly position the stereo image, putting you
right in the center of the sound field. The posi-
tion selector function lets you automatically
adjust the speakers output levels and inserts
a delay time to match the number and posi-
tion of occupied seats.
1 Press DSP to select the position selec-
tor.
Press DSP until Posi appears in the display.
# If the position selector has been previously set
to a listening position then the title of that pre-
viously selected listening position will be dis-
played instead of Posi.
2 Press c/d/a/b to select a listening po-
sition.
Direction Display Indicator Position
Up Front
Front seats
Down All
All seats
Left Front-L
Front seat
left
Right Front-R
Front seat
right
# To cancel the selected listening position,
press the same button again.
Using sound field control
and BBE sound
SFC (sound field control) incorporate three
programs for reproducing typical sound fields
of a studio, jazz club or club. This function
makes it possible to reproduce the realistic
sound fields of the three programs in your car.
With BBE, playback very close to the original
sound can be obtained by correction with a
combination of phase compensation and
high-range boost for the delay of the high-fre-
quency components and the amplitude devia-
tion occurring during playback. This function
makes it possible to reproduce the dynamic
sound field as if you are listening to a live per-
formance.
Note
Manufactured under license from BBE Sound,
Inc. The mark BBE is a trademark of BBE Sound,
Inc.
Recalling sound field programs
Here is a list of the sound field programs:
Display Effect
Studio Studio
JazzClub Jazz club
CLUB Club
BBE BBE
1 Press DSP to select the sound field con-
trol.
Press DSP until SFC appears in the display.
# If the sound field control has been previously
set to a sound field program then the title of that
previously selected sound field program will be
displayed instead of SFC.
2 Press c or d to select a sound field pro-
gram.
Press c or d until the desired setting appears
in the display.
Digital Signal Processor
En
40
Section
10