Specifications
General
Rated power source ............... 14.4 V DC
(allowable voltage range:
12.0 14.4 V DC)
Grounding system ................... Negative type
Max. current consumption
..................................................... 10 A
Dimensions (W × H × D):
Chassis ............................... 178 × 100 × 161 mm
Nose ..................................... 170 × 94 × 25 mm
Weight .......................................... 1.9 kg
Audio/DSP
Continuous power output is 22 W per channel minimum
into 4 ohms, both channels driven 50 to 15,000 Hz with
no more than 5% THD.
Maximum power output ....... 50 W × 4
Load impedance ...................... 4 W (4 8 W allowable)
Preout max output level/output impedance
..................................................... 1.8 V/1 kW
Loudness contour ................... +10 dB (100 Hz), +7 dB (10
kHz) (volume: 30 dB)
Equalizer (9-Band Graphic Equalizer):
Frequency .......................... 50/100/200/400/800 Hz
1.6/3.15/6.3/12.5 kHz
Equalization range ........ ±12 dB
Network:
HPF (Front/rear):
Frequency ................ 50/63/80/100/125 Hz
Slope .......................... 6 dB/oct, 12 dB/oct
Subwoofer:
Frequency ................ 50/63/80/100/125 Hz
Slope .......................... 12 dB/oct, 18 dB/oct
Gain ............................ +6 24 dB
Phase ........................ Normal/Reverse
CD player
System .......................................... Compact disc audio system
Usable discs .............................. Compact disc
Signal format:
Sampling frequency ..... 44.1 kHz
Number of quantization bits
........................................... 16; linear
Frequency characteristics ...5 20,000 Hz (±1 dB)
Signal-to-noise ratio ............... 94 dB (1 kHz) (IEC-A net-
work)
Dynamic range ......................... 92 dB (1 kHz)
Number of channels .............. 2 (stereo)
MP3 decoding format ........... MPEG-1 & 2 Audio Layer 3
WMA decoding format ......... Ver. 7, 7.1, 8, 9 (2ch audio)
AAC decoding format ............ MPEG-4 AAC (iTunes
®
en-
coded only)
WAV signal format .................. Linear PCM & MS ADPCM
Cassette player
Tape ................................................ Compact cassette tape (C-
30 C-90)
Tape speed .................................. 4.8 cm/sec
Fast forward/rewinding time
..................................................... Approx. 100 sec (C-60)
Wow & flutter ............................. 0.09 % (WRMS)
Frequency response:
Metal ................................... 30 19,000 Hz (±3 dB)
Stereo separation .................... 45 dB
Signal-to-noise ratio:
Metal:
Dolby B NR IN ....... 67 dB (IEC-A network)
Dolby NR OUT ....... 61 dB (IEC-A network)
FM tuner
Frequency range ...................... 87.5 108.0 MHz
Usable sensitivity ..................... 8 dBf (0.7 µV/75 W, mono,
S/N: 30 dB)
50 dB quieting sensitivity ..... 10 dBf (0.9 µV/75 W, mono)
Signal-to-noise ratio ............... 75 dB (IEC-A network)
Distortion ..................................... 0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65 dBf, 1 kHz,
mono)
Frequency response ............... 30 15,000 Hz (±3 dB)
Stereo separation .................... 45 dB (at 65 dBf, 1 kHz)
AM tuner
Frequency range ...................... 531 1,602 kHz (9 kHz)
530 1,640 kHz (10 kHz)
Usable sensitivity ..................... 18 µV (S/N: 20 dB)
Signal-to-noise ratio ............... 65 dB (IEC-A network)
Infrared remote control
Wavelength ................................. 940 nm ±50 nm
Output ........................................... typ; 12 mw/sr per Infrared
LED
Note
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
Additional Information
En
54
Appendix