Filter
Top Products
(1*/,6+
8VLQJ5'6)XQFWLRQV
$ ))XQFWLRQ
The AF (Alternative Frequencies search) function is used to search for other
frequencies in the same network as the currently tuned station. It automatically retunes
the receiver to another frequency in the network which is broadcasting a stronger
signal when there are problems with reception of the currently tuned station or better
reception is possible on a different frequency.
• AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory
with the “AF” indicator ON.
• When you recall a preset station, the tuner may update the preset station with a new
frequency from the station's AF list. (This is only available when using presets on the FM1
band.) No preset number appears on the display if the RDS data for the station received
differs from that for the originally stored station.
• Sound may be temporarily interrupted by another program during an AF frequency search.
• When the tuner is tuned to a non-RDS station, the “AF” indicator flashes.
• AF can be switched ON or OFF independently for each FM band.
AF is set to ON by default.
*
To turn AF back ON, repeat the preceding operation.
Hold for 2 seconds “AF” disappears
3,6HHN)XQFWLRQ
The tuner searches for another frequency broadcasting the same programming. “PI
SEEK” appears on the display and the radio volume is muted during a PI Seek. The
muting is discontinued after completion of the PI Seek, whether or not the PI seek has
succeeded. If the PI Seek is unsuccessful, the tuner returns to the previous frequency.
If the tuner fails to locate a suitable alternative frequency or if the broadcasting signal
is too weak for proper reception, the PI Seek will automatically start.
When preset stations cannot be recalled, as when traveling long distances, this
product can be set to perform PI Seek also during preset recall.
The default setting for Auto PI Seek is OFF.
• Refer to “Initial Setting” for details on how to switch Auto PI Seek ON/OFF.
5HJLRQDO)XQFWLRQ
When AF is used to retune the tuner automatically, REG (regional) limits the selection
to stations broadcasting regional programs.
• Regional programming and regional networks are organized differently depending on the
country (i.e., they may change according to the hour, state or broadcast area).
• The preset number may disappear on the display if the tuner tunes in a regional station
which differs from the originally set station.
• REG can be switched ON or OFF independently for each FM band.
The REG function is set to ON by default.
*
To turn REG back ON, repeat the preceding operation.
Hold for 2 seconds
MAN-KEH-P5010R-GB_B.fm Page 10 Friday, October 6, 2000 2:22 PM