Filter
Top Products
(1*/,6+
$XGLR$GMXVWPHQW
The Loudness function compensates for deficiencies in the low and high sound ranges
at low volume. You can select a desired Loudness level.
The F.I.E. (Front Image Enhancer) function is a simple method of enhancing front
imaging by cutting mid- and high-range frequency output from the rear speakers,
limiting their output to low-range frequencies. You can select the frequency you want
to cut.
• After switching the F.I.E. function ON, select the Fader/Balance mode in the Audio Menu,
and adjust front and rear speaker volume levels until they are balanced.
• Switch the F.I.E. function OFF when using a 2-speaker system.
When the F.I.E. function is deactivated, the rear speakers output sound of all
frequencies, not just bass sounds. Reduce the volume before disengaging F.I.E. to
prevent a sudden increase in volume.
8/2
“”
4/6
LOW (low)
_
MID (mid)
_
HI (high)
8/2
4/6
100
_
160
_
250 (Hz)
The SLA (Source Level Adjustment) function prevents radical leaps in volume level
when switching between sources. Settings are based on the FM volume level, which
remains unchanged.
• Since the FM volume is the control, SLA is not possible in the FM modes.
• The MW/LW volume level, which is different from the FM base setting volume level, can be
adjusted similar to sources other than tuner.
8/2
The display shows “+4” – “–4”.
MAN-KEH-P5010R-GB_B.fm Page 16 Friday, October 6, 2000 2:22 PM