Filter
Top Products
9
Setting the Display Mouting Location
3. Choose item [LOCATION].
Press the VOLUME control
(
∞/5
)
buttons.
5:Choose upper items.
∞:Choose lower items.
4. Choose the display mounting location.
Press the 2/3 buttons.
[FRONT] and [REAR] toggle. If the display has been located for the driver to view video,
choose [FRONT]; if not, choose [REAR].
5. Complete the setting.
Press the WIDE/MENU button.
Press the WIDE/MENU button a number of times to close the menu and complete the set-
ting. The display location setting is now complete.
Note:
• When [LOCATION] has been set to [FRONT], video cannot be viewed while the vehicle is mov-
ing. The menu screen cannot be displayed while the vehicle is moving. ([ATTENTION] will be dis-
played while the vehicle is moving.)
Stop the vehicle in a safe place, apply the parking brake, and wait for [ATTENTION] to be cleared
before starting operation.
• [MIXING] is for future use.
REAR
MIXING
LOCATION
OFF
SELECT
DISPLAY SETTING
REAR
MIXING
LOCATION
OFF
SELECT
DISPLAY SETTING
Choose
Choose [LOCATION]