Filter
Top Products
14
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS ITALIANO NEDERLANDS
2. Press the V.SEL button.
Only the video will be switched between VCR1 and VCR2 when this button is pressed.
Note:
• Return to the setting for switching video, audio and external output at the same time.
Press the SP.SEL or V.SEL button for 2 sec or more.
Volume Adjustment
Adjust the volume of audio output from the built-in speaker.
1. Adjust the speaker volume.
Press the VOLUME control
(
∞/5
)
buttons.
5:Turn up
∞:Turn down
VOL
12
VCR 1
VCR 1
VOL
12
VOLUME control
(
∞/5
)
buttons
The volume of the built-in speaker can be
adjusted in a range of 0 to 30 ( The volume
level will be displayed for about 4 seconds ).
The video and audio will be switched at the same
time each time that the SELECTOR button is pressed.
If you press the SP.SEL or V.SEL button when audio
and video are switched with the SELECTOR button,
[SELECTOR] appears in red on the screen, indicating
that the audio and video can be switched simultane-
ously using the SELECTOR button.