Filter
Top Products
Specifications
General
Power source .............................14.4 V DC (10.8 15.1V al-
lowable)
Grounding system ...................Negative type
Max. current consumption
.....................................................10.0 A
Dimensions (W × H× D):
DIN
Chassis .....................178 × 50 × 157 mm
Nose........................... 188 × 58 × 19 mm
D
Chassis .....................178 × 50 × 162 mm
Nose........................... 170 × 46 × 14 mm
Weight ..........................................1.4 kg
Audio
Maximum power output.......50 W × 4
50 W × 2/4W +70W×1/2
W (for subwoofer)
Continuous power output ...27 W × 4 (DIN45324,
+B=14.4 V)
Load impedance ......................4 W(4 8 W[2 W for 1ch] al-
lowable)
Preoutmax output level/output impedance
.....................................................6.5 V/100W
Equalizer (3-Band Parametric Equalizer):
Low
Frequency ................40/80/100/160 Hz
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................±12dB
Mid
Frequency ................200/500/1k/2k Hz
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................±12dB
High
Frequency ................3.15k/8k/10k/12.5k Hz
Q Factor .................... 0.35/0.59/0.95/1.15 (+6 dB
when boosted)
Gain ............................±12dB
Loudness contour
Low ....................................... +3.5 dB (100 Hz), +3dB (10
kHz)
Mid .......................................+10 dB (100 Hz), +6.5 dB
(10 kHz)
High .....................................+11 dB (100 Hz), +11 dB
(10 kHz)
(volume: 30 dB)
Tonecontrols:
Bass
Frequency ................40/63/100/160 Hz
Gain ............................±12dB
Treble
Frequency ................2.5k/4k/6.3k/10k Hz
Gain ............................±12dB
HPF:
Frequency ..........................50/80/125 Hz
Slope....................................12 dB/oct
Subwoofer:
Frequency ..........................50/80/125 Hz
Slope....................................18 dB/oct
Gain ......................................±12dB
Phase ..................................Normal/Reverse
CD player
System ..........................................Compact disc audio system
Usable discs ..............................Compact disc
Signal format:
Sampling frequency .....44.1 kHz
Number of quantization bits
...........................................16; linear
Frequency characteristics ...5 20,000 Hz (±1 dB)
Signal-to-noise ratio ...............94 dB (1 kHz)(IEC-A net-
work)
Dynamic range .........................92 dB (1 kHz)
Number of channels ..............2 (stereo)
MP3 decoding format ........... MPEG-1 & 2Audio Layer 3
WMA decoding format .........Ver. 7 & 8
FM tuner
Frequency range ......................87.5 108.0 MHz
Usable sensitivity .....................8 dBf (0.7 µV/75 W, mono,
S/N: 30 dB)
50 dB quieting sensitivity.....10 dBf (0.9 µV/75 W,mono)
Signal-to-noise ratio ...............75 dB (IEC-A network)
Distortion .....................................0.3 % (at 65 dBf, 1 kHz,
stereo)
0.1 % (at 65 dBf,1 kHz,
mono)
Frequency response ...............30 15,000 Hz (±3dB)
Stereo separation ....................45 dB (at 65 dBf, 1 kHz)
Selectivity .................................... 80 dB (±200 kHz)
MW tuner
Frequency range ......................531 1,602 kHz (9 kHz)
Usable sensitivity .....................18 µV (S/N: 20 dB)
Signal-to-noise ratio ...............65 dB (IEC-A network)
LW tuner
Frequency range ......................153 281 kHz
Usable sensitivity .....................30 µV (S/N: 20 dB)
Signal-to-noise ratio ...............65 dB (IEC-A network)
Note
Specifications and the design are subject to pos-
sible modifications without notice due to im-
provements.
Additional Information
En
60
Appendix