Filter
Top Products
Connecting up
02
13
En
English
Wall mounting the display unit
It is possibe to mount the display unit on the wall.
Before mounting:
• Remember that the display unit is heavy and could
cause the wood screws to work loose, or the wall
material to fail to support it, resulting in the display
falling. Make sure that the wall you intend to mount
the display on is strong enough to support it. Do not
mount on plywood or soft surface walls.
• Mounting screws are not supplied. Use screws that
are suitable for the wall material and that will support
the weight of the display.
•Pioneer bears no responsibility for accidents resulting
from faulty assembly or installation, insufficient
mounting strength of walls or other building fixtures,
misuse or natural disasters.
• If you are unsure of the qualities and strength of the
wall, consult a professional for advice.
Using this system for TV audio
If your TV has a stereo audio output you can connect it to
this system and enjoy surround TV sound.
1 Connect the AUDIO OUTPUT jacks on your TV to the
AUX AUDIO INPUT jacks on the receiver subwoofer.
Use the red/white stereo audio cable (not supplied) for
this connection. Make sure you match the left and right
outputs with their corresponding inputs for correct
stereo sound.
• You can use the
AUX
input jacks for any analog
source you want, such as a tape deck, etc.
5
27
/32 in.
148.5 mm
3/32 in./ 2.5 mm
Mounting screw
(not supplied)
5/32 in.
4 mm
3/8 in.
10 mm
TV
SPEAKERS
SUB WOOFER
CENTER
SURROUND
DIGITAL
AUDIO INPUT
RL
R
L
FRONT
RL
CONTROL
OUT
SYSTEM CONNECTOR
USE ONLY WITH DISPLAY UNIT.
SEE INSTRUCTION MANUAL.
AC IN
ANALOG
DTV
(OPTICAL)
DVD
(COAXIAL)
AUXPC/GAME
(OPTICAL)
AUDIO
OUTPUT
1
SX-SW260_KU.book Page13 Wednesday, March29,2006 2:43PM