Filter
Top Products
Additional information
09
31
En
English
Installation and maintenance
Hints on installation
We want you to enjoy using this system for years to come,
so please bear in mind the following points when
choosing a location:
Do...
Use in a well-ventilated room.
Place on a solid, flat, level surface, such as a table, shelf or
stereo rack
.
Don’t...
Use in a place exposed to high temperatures or humidity,
including near radiators and other heat-generating
appliances.
Place on a window sill or other place where the system will
be exposed to direct sunlight.
Use in an excessively dusty or damp environment.
Place directly on top of an amplifier, or other component in
your stereo system that becomes hot in use.
Use near a television or monitor as you may experience
interference—especially if the television uses an indoor
antenna.
Use in a kitchen or other room where the system may be
exposed to smoke or steam.
Use on a thick rug or carpet, or cover with cloth—this may
prevent proper cooling of the system unit.
Place on an unstable surface, or one that is not large enough
to support all four of the system unit’s feet.
Glossary
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered
trademarks of Digital Theater Systems, Inc.
Setting up the remote to control your
TV
You can use the supplied remote to control your TV. To be
able to use this feature you first have to program the
remote with a maker code from the table on the following
page.
1 Switch on your TV.
2 Press and hold down the
CLEAR
button, then enter
the maker code for your TV.
• If the maker’s name of your TV doesn’t appear in the
table, you will not be able to use this remote to
control your TV.
3 Point the remote towards your TV and press
TV
to check that the remote works with your TV.
If the remote is set up correctly, the TV should switch off.
If it doesn’t and there is another code given for your
maker, repeat step
2
with a new code.
Using the TV remote control buttons
The table below shows how to use this remote control
with your TV.
Dolby Digital
A multi-channel audio encoding system developed
by Dolby Laboratories that enables far more audio
to be stored on a disc than PCM encoding.
Dolby
Pro Logic II
A matrix decoding technology developed by Dolby
Laboratories that expands any two-channel source
audio, such as CDs and TV broadcasts, to a five-
channel playback (left/center/right/left surround/
right surround), resulting in a surround
experience.
DTS
A multi-channel audio encoding system developed
by Digital Theater Systems that enables far more
audio to be stored on a disc than PCM encoding.
Button
What it does
TV
Press to switch the TV on/off (standby)
INPUT
Press to change the TV’s video input
TV VOLUME
Use to adjust the TV volume
TV CHANNEL
Use to change TV channels
TV CONTROL
TV
INPUT
TUNE
TUNE
SOUND
VOLUME
SETUP
TEST
TONE
ST
ST
CHANNEL
SOUND
RETRIEVER
MCACCADVANCEDSURROUND
VOLUME
SR
DVD DTV
PC/GAME
AUX
TUNER
ENTER
ENTER
CLEAR
SX-SW260_KU.book Page31 Wednesday, March29,2006 2:43PM