16
SPECIFICATIONS
Amplifier Section
#
Power output ...................................................................................................................600 W (20 Hz to 20 kHz, T.H.D., 0.2 %, 4
Ω
)
300 W (20 Hz to 20 kHz, T.H.D., 0.2 %, 8
Ω
)
Rated distortion ........................................................................................................Less than 0.03 % (20 Hz to 20 kHz, 300 W, 4
Ω
)
Signal-to-Noise Ratio (IHF, short circuited, A network) .......................................................................................... 125 dB or higher
Frequency response ........................................................................................................................................1 Hz to 100 kHz,
+0
–1
dB
Gain ..............................................................................................................................................................................................29.5 dB
Input terminal (Sensitivity/ Impedance) ........................................................................................................................ 1.5 V / 220 k
Ω
Power section/miscellaneous
#
Power requirements .....................................................................................................................................................AC 120 V, 60 Hz
Power consumption .....................................................................................................................................................................520 W
Dimensions ......................................................................................................................516 mm (W) × 297 mm (H) × 622 mm (D)
(20
5
/
16
in. (W) x 11
11
/
16
in. (H) x 24
1
/
2
in. (D))
Dimensions (When using spike bases) .........................................................................516 mm (W) × 307 mm (H) × 622 mm (D)
(20
5
/
16
in. (W) x 12
1
/
16
in. (H) x 24
1
/
2
in. (D))
Weight .........................................................................................................................................................................90.0 kg (198.4 lb)
Accessories
#
Power cord .............................................................................................................................................................................................1
Spike bases ............................................................................................................................................................................................4
Spike base template ..............................................................................................................................................................................1
Hexagon wrench ....................................................................................................................................................................................1
Operating Instructions (this document) ..............................................................................................................................................1
Note
Specifications and the design are subject to possible modifications without notice, due to improvements.
'