Filter
Top Products
Other features06
18
En
Displaying RDS information
RDS (Radio Data System) is a service that allows FM stations
to show additional information. If you tune to an RDS radio
station, [RDS] and the station name are displayed.
1 Tune to an RDS radio station.
2 Press
RDS
repeatedly to scroll through the
available information:
• Station name
• Program type such as [NEWS] (news), [SPORT] (sport),
[POP M] (pop music)...
• Text messages
•Frequency
Searching for RDS programs
You can search for a program type.
1 Press
PTY/ASPM
.
[SEARCH] appears in the display.
2 Press
/
to select the program type you
want to hear.
3 Press
PTY/ASPM
to search for the program
type.
The product starts searching in the station presets.
If [NO FOUND] is displayed, it means the tuner couldn’t find
that program type at the time of the search.
ASPM (Auto Station Program
Memory)
You can program up to 20 preset RDS stations.
• Press and hold
PTY/ASPM
.
All the available RDS stations are programmed. (up to 20
stations)
Playing audio from an external
device
You can use this product to play audio from an external
device.
1 Connect the stereo mini-plug cable to
•the AUX IN jack of this product
• the audio output jack (usually headphone jack) of the
external device.
2Press
AUX
.
3 Play the external device (see the user’s
manual of this device for details).
Listening through the headphones
Plug your headphones into the PHONES socket on the front
panel of the main unit.
Note
• No audio output from the headphones socket when you
listen to the docked iPod/iPhone. Listen through the
speakers instead.
Turning on/off automatically
You can set a time for automatic power on and off.
Note
• Make sure that you have set the clock before this setup.
1 In standby mode, press and hold
SLEEP/
TIMER
.
[TIMER ON] (time for auto power on) blinks.
2Press
SLEEP/TIMER
.
The hour digits blink.
3Press
/
to set the hour.
4Press
SLEEP/TIMER
again.
The minute digits blink.
5Press
/
to set the minute.
6Press
SLEEP/TIMER
to confirm the time for
auto power on.
[TIMER ON] blinks.
• If you want to set the power-off time, press / to
select [TIMER OFF] (time for auto power off), and then
repeat steps 2-6.
X-EM21V_SYXE8_En.book Page 18 Tuesday, July 31, 2012 9:43 AM