Filter
Top Products
26 LA1500R, LA1500RTR and LA1500RTS User’s Guide (020-0319-03 Rev. A)
LA1500RTS Install Instructions
If you are using a PC running Windows® 7, VISTA, XP, 2000, ME, 98, NT4.0,
follow the instructions below:
1. Power on the PC.
2. Be sure the USB or the RS-232 Serial cable is connected from the PC to the
LCD display.
3. Follow the step-by-step instructions as shown on the pop-up windows.
If you are using a PC running Windows® XP Embedded,
follow the instructions below:
Express:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Make sure that your EWF is disabled. If your EWF is enabled, please dis-
able the EWF by using the EWF Manager command.
4. Once the EWF is disabled click on the XP driver at www.planar.com/sup-
port and follow the step-by-step instructions as shown on the pop-up
windows.
Custom:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped le at www.
planar.com/support.
If you are using a PC running Windows® CE,
follow the instructions below:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Using Platform Builder, build an image le by following the step-by-step
instructions found in the zipped le on www.planar.com/support.
If you are using a PC running Linux or Apple® Mac OS,
follow the instructions below:
1. Power on the computer.
2. Make sure that the RS232 or USB cable is connected to the computer.
3. Follow the step-by-step instructions found in the zipped le at www.
planar.com/support.