Filter
Top Products
LA1500R, LA1500RTR, and LA1500RTS User’s Guide (020-0319-03 Rev. A) 27
When changing the Touch Interface (RS-232 or USB),
please follow the instructions below:
1. Uninstall the touch driver.
2. Re-start the computer.
3. Remove the original Touch Interface (RS-232 or USB).
4. Connect the computer to the Touch Interface (RS-232 or USB) that you
would like to use.
5. Load the driver found at www.planar.com/support, and then follow the
step-by-step instructions as show on monitor.
PLEASE NOTE!
Don’t plug in both the RS-232 and USB cables!
Doing so may cause a driver con ict, making your touch screen inoperable.