Filter
Top Products
LX1250TI User Manual 4
USAGE Notice
Precautions
To maximize the life and safe use of your unit, always be sure to follow the warnings, precautions and
maintenance recommendations in this user’s guide.
In a Vehicle:
The monitor should be visible to the driver only if it is used for navigation, system control or vehicle
information. If the monitor will be used for other purposes, it should be installed in a way that it will
only operate while the vehicle is not moving (such as when the parking brake is in use), or so that its
display is not visible to the driver. Review all applicable state and local laws and regulations to make
sure the monitor is used properly and safely. Avoid using the monitor for extended times while the
vehicle is not running, or the monitor could drain the vehicle’s battery.
Cleaning the Monitor:
Always turn of the unit before cleaning. Use a soft cloth moistened with mild detergent, isopropyl
alcohol, or window cleaners to clean the display housing. Never use abrasive cleaners, waxes or
solvents to clean the unit.
Accessory Cables:
The LX1250TI (PN# 997-6186-00LF) requires a special interface cable. This manual contains information
to design the interface cable OR an accessory interface cable can be purchased.
PN#. 997-5886-00LF GlenAir to VGA, Power, USB & Audio
For remote control: Download USB to RS232 Driver from Planar website at
http://www.planar.com/support/