Filter
Top Products
Connection14
Connecting the YPbPr component video input
1. Connect the VIDEO IN (YPbPr) jacks on the display to the component output jacks on an A/V
device (such as a VCR or DVD player) using a component video cable.
2. Connect the A/V device’s audio output jacks to the AUDIO IN jack on the display using a
suitable audio cable. To select an appropriate audio source, see "Audio Source" on page 35
for details.
3. To view video image from this input, press the YPbPr button on the remote control, or select
YPbPr from the source selection bar.
Note:
• The cables are not supplied and should be purchased separately.
100-240V~50-60Hz
1.5A
IN
AC SWITCH
ON/ OFF
Audio cable
DVD player / VCR
Component video cable