Filter
Top Products
3
I. PREPARATION OF VEHICLE INTERIOR
1. Remove the O.E.M. console mounted to inner
roof of vehicle. Remove and discard (1) one
screw from recess in front of console near rear
view mirror. Disconnect wire harness and
remove console from vehicle. Use care not to
damage A/C control head. See Figure 1.
2. Remove A/C control head from cloth covered
trim ring on O.E M. console by depressing (4)
four tabs on back of control assembly.
See Figure 2. Discard cloth covered trim ring.
3. Remove and discard O.E.M. dome light by
removing center cover and (2) two screws.
Disconnect wire harness. See Figure 3.
4. Carefully remove and retain bezel from rear
A/C control head and lay it in a safe place.
See Fig. 3.
5. Remove and retain rear A/C control head and
lay it in a safe place. See Figure 3.
FIGURE 1
FIGURE 2
FIGURE 3