Filter
Top Products
15
OPERATION
you select a track number that doesn’t
belong to the current disc, “NO TR” will
appear on the display.
REPEATING THE SAME TRACK
Hold press RPT button (21) for several
seconds to continuously repeat the same
track. Hold press it again to stop repeat.
PLAYING ALL TRACKS IN RANDOM
Hold press SHF button (22) for several
seconds to play all tracks on CD in
random order. Hold press again to cancel
the function.
PREVIEWING ALL TRACKS
Hold press SCN button (23) for several
seconds to play first several seconds of
each track on the current disc. Hold
press again to stop intro and listen to
track.
PROGRAM CD TRACKS
Use Program function to select up to 32
tracks to play in any order. Program
works by allowing you to select a track
number for each spot in the playing
sequence. A CD must be inserted and in
CD playing mode to use Program.
- How to program CD tracks.
1. Hold press MEM button (19) for
several seconds to enter Program
mode, then “PGM” stars flashing and
“P-01” icon appear on the display.
2. Press
CH button (16) or CH button
(17) to choose track number. For
example, select track 6, then press
MEM button (19) shortly to memorize
it and “P-02” will appear on the
display. So track 6 will be played first.
Thus, you can also press
CH /
buttons (17) and (16) to choose track
number 10 and press MEM button
shortly, then “P-03” will appear. So
track 10 will be secondly played.
Repeat these operations, and you can
program CD tracks to your need. If
you completed program setting, hold
press PGM button (20) for several
seconds to play CD in programmed
order.
Note: Using Program function can
only select up to 32 tracks to play in
any order. When you have selected 32
tracks to be programmed. “FULL” will
appear on the display.
- When the CD is played in
programmed order by hold pressing
PGM button (20) for several
seconds, hold pressing it again for
several seconds will exit PGM
mode.
- When the disc is playing in
programmed order, hold pressing
MEM button (19) for several
seconds will cancel the all
programmed content and “CLEAR”
appears on the display.
- If you don’t press MEM button (19)
to carry out program setting, then
hold press PGM button (20) for
several seconds, “NO-PGM” will
appear.
TRACK/TIME DISPLAY
Press AS/PS button (2) to show running
time/remain time of track.
CDC OPERATION
You can connect a CD changer to the
unit with CDC operation version only.
Information on handing CDs, inserting
CDs and operating the CD changer can
be found in the operating instructions
supplied with your CD changer.
SWITCHING TO CDC MODE
Keep pressing MODE button (6) shortly
until the CDC mode display appears.
Playback begins with the first CD that
the CD changer detects.
PAUSING PLAYING
Press
/MUTE button (3) to pause
CDC player. Press it again to resume
play.
SELECTING TRACKS
Press
CH button (16) or CH button
(17) to move to the previous track or the
following track. Track number shows on
display.
Hold press
CH button (16) or CH
button (17) to fast reverse or fast forward.
Disc play starts from when you release
the button.