Filter
Top Products
DISC/USB/SD AV IN
TUNER
Sub-woofer: ON/OFF
2. Rotate the button to choose the
desired item.
Press button (29) to choose the
desired item.
Display/Adjust Time
1. Displaying time:
Press button (7) to show current
information and time on the LCD, and it
returns to original status after 5 seconds.
2. Adjusting time:
1). Press and hold button (7) until
the clock blinking.
2).Press or buttontomoveto
between hour area and minute area.
3). Rotate button (6) or to
adjust hour or minute.
LCD Display (8)
Exhibit current information and activated
functions on the LCD display (8).
Remote Sensor
Point the remote control handset to the
remote sensor (9). Press the function
keys on the handset to control the
system.
Flashing Led (10)
The led display will flash if the front cover
is not inserted into the main unit.
ESP function
If the unit has the electronic shockproof
function, it can be shockproof about
several seconds:
CD, VCD: 18 seconds.
MP3: 160 seconds.
DVD: 6 seconds.
MPEG4: 20 seconds.
Loudness on/off
Loudness introduces a special low- and
high-frequency emphasis at low listening
levels. This compensates for the ear's
decreased sensitivity to bass and treble
sound. Press button (11) to switch
loudness on/off.
Equalization
Press button (12) to turn on
VOL
Remote control operation
DISP
DISP
VOL
IR
LOUD
EQ
equalization function and to select
desired audio mode. There are f ur kinds
of mode as below:
o
Mute Function
Press button (2) to silence the
sound instantly, press it again to resume
previous volume level.
MUTE
Mode Function
Press button (13) to switch to the
desired mode.
The mode will change every time the
button is pressed.
MODE
Last Position Memory
- During disc playback, if you press
button (2) to turn off the unit and then
press the button again to turn on the unit,
the DVD unit will resume playing from the
point that it was interrupted.
- During disc playback, if you press
button (13) to switch to other
mode, and then return to DVD/VCD mode
again, the unit will resume playing from
the point that it was interrupted.
Sub-Woofer Function
This unit is equipped with a sub-woofer
output jack. When a sub-woofer is
connects to this unit. Press button
(6) repeatedly to select SUBW and then
rotate button to turn sub-woofer
output on or off.
Reset Function
button on the housing must be
activated with either a ballpoint pen or
thin metal object. The button (1)
is to be activated for the following
reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not
operate.
MODE
VOL
VOL
RESET
RESET
TV
EQ FLAT EQ CLAS
EQ ROCK EQ POP
8