Filter
Top Products
Radio Operation
-20-
MODE
SEL VOLUME+VOLUME-
MUTEON
FM1 87.60
MHZ
123456
FLAT
NO-DISC
12:06
DX
ST
TA
Touch topreset station
Scan Function
In Radio mode, briefly touch the
section on the touch screen ,
the radio briefly plays all the
APS
preset stations of the frequency band .
APS
e.g. FM1, for the stronger signal
level until the search cycle has finished .
The six strongest stations are then
allocated to the corresponding storage
locations . Then the station of the first
storage location is set .
RDS FUNCTION
In Radio mode, touch it to select
the desired item, it will display the
following as below :
TATraffic Annonuncement
(priority ForTraffic Information)
In Radio mode, touch briefly the
screen of range to activate
the TAfunction.
“TA”
Touch it again to turn off the TAfunction .
When the TA function is activated, the
TA symbol appears in the display .
During radio operation in one FM
frequency band the search for a traffic
announcement station is started
automatically (TA SEEK) .
If an FM station is being received which
transmits the latest traffic announce-
ments from time to time, the TP display
lights up.
TA
AF
FM1 87.60
MHZ
FLAT
NO-DISC
12:06
DX
ST
AF
TA
PTY
CLOCK LOUDNESS
LOC
Touchtoselect
Storing Stations In Memory
Touch the screen of the sections“1-6 ”
With this system, a total of 30 stations
can be stored in the memory of six
buttons. Each band stores up to six
preset stations. The stations might be
FM1, FM2, FM3, AM1(MW1), and
AM2(MW2) band.
The operation is as below :
-Retrieveapreset station
1-6sectionsTouch the briefly to retrieve
a station which had been stored in the
memory in advance the chose number
is shown on display .
-Storein Memory
> Select the frequency band
> Select the station
> Keep the desired memory key pressed
in until the station is heard again after a
brief interruption .
Automatic Memory Storing&
Program Scanning
Automatic Preset Setup
In Radio Mode, Touch and keep the
APS section on the touch screen
for about 2 seconds to active
APS
automatic station storage. The radio
searches within the current frequency
band,