Filter
Top Products
2.
LISTEN
TO FM
RADIO
Connect the supplied
FM
antenna to
FM
ANT jack on the rear
of
the unit
as the figure
below. Extend the wire and relocation it to get the best
reception.
1) Press
POWER button on the unit to tum the unit to standby mode.
2) Press STANDBY button
on
the unit
or
POWER button on remote
control to turn on the unit.
3) Press
INPUT button on the unit or remote control repeatedly until
FM
frequency appears on the display.
4) Press
....
or
~
button on remote control repeatedly to search the
specific radio stations.
(AUTO SEARCH: Press and hold
....
or
~
button for about 2 seconds and then release the button, the unit will
auto search the next
available radio station then stop. Repeat above
procedure to search other
available radio stations. )
5)
To
store the current received radio station into the memory. Press
ENTER button on the remote
control,
CH
01
will appear
on
the display.
Press
....
or
~
buttons repeatedly to select channel number as desire.
Press ENTER button again to stored the current radio station to the
selected channel.
6)
To
listen the preset channels, press
....
or
~
buttons
on
the remote
control repeatedly until the desired channel appear on the display.
7) Press the
R1L
button on the remote control repeatedly to select stereo
or
mono as desire. STEREO or MONO will appear on the display.
3.
HD
MEDIA PLAYER OPERATION
Before connecting USB flash drive
or
SO
cards please make sure they
are in right direction. Refer
following figure.
\
IBBBSI··
Play Video Music and Photo
1 )Press power switch ,then press STANDBY button on the unit
or
POWER
button on remote control to turn the unit to standby mode.
2)Unit acquiesce enter HD mode(Media
play mode) when turn on the unit.
Interface as below:
There are five mode: Movie,Picture,Music,Setting,Explore.
Press
<II
and
~
button to choose mode, press ENTER button
to enter each mode