Filter
Top Products
8
• When the receiver is off, the display
always shows local time. When the
receiver is turned on, the time disap-
pears and a radio frequency
appears. To see the time when the
receiver is on, press
CLOCK
. Press
CLOCK
again to return to the radio
frequency display.
Setting the Secondary Clock
Follow these steps to set the secondary
clock.
1. Press
POWER
, then press
DUAL
TIME
. WORLD TIME appears.
2. Press
TIME SET
. The hour digit and
WORLD TIME flash for 10 seconds.
3. While the display flashes, use the
number keys to enter the hour for
the secondary clock. Or, press
>
to
advance the hour or
<
to set it back.
Notes:
• The minutes change automatically,
according to the primary clock set-
ting.
• If the clock is in 12-hour format and
you press
>
or
<
to set the hour, PM
automatically appears on the dis-
play. If you use the number keys to
enter the hour, press
AM/PM
to note
the time is PM.
4. Press
TIME SET
again to set the
secondary clock.
To see the secondary clock time,
press
DUAL TIME
. The display
shows the time and
WORLD TIME
for 10 seconds, then automatically
returns to the primary clock time or
the radio frequency display (when
the receiver is on).
To return to the primary clock or
radio frequency display before 10
seconds have passed, press
DUAL
TIME
again.
SETTING THE AM/FM
TUNING INCREMENT
You can set the AM/FM tuning incre-
ment to the correct frequency used in
other countries as you travel.
1. Slide the battery compartment cover
in the direction of the arrow and
remove the cover.
2. Remove any batteries from the com-
partment.
3.
To easily receive broadcasts when
you travel to other countries
, set
A/B
to
A
.
To easily receive broadcasts at
home
, set
A/B
to
B
.
For example, 10 kHz is used in
North and South America, while 9
kHz is dominant in Europe.
4. Replace the batteries.
5. Replace the cover.
20-226.fm Page 8 Tuesday, December 7, 1999 1:48 PM