RCA 27V514T Car Video System User Manual


 
Chapter 3 25
Chapter 3: Using the TV’s Menu System
Sound Menu
To access the Sound menu, press MENU on the remote and select SOUND from
the MAIN MENU. Depending on the kind of signal you’re watching, the Sound
Menu will have different items available for you to adjust.
If you are watching analog programming or any video inputs, you’ll see a
screen similar to the example SOUND menu to the left.
If you’re watching digital programming, you’ll see the second menu to the
left. The ANTENNA button on the remote toggles between analog and digital
menus.
Tone Control Allows you to choose your desired sound mode and adjust
the equalizer sliders.
• Preset Press the left or right arrow
button to select your desired
sound mode: Personal, Standard, Music, Speech and Theatre. When
you change any equalizer slider, the Preset changes to Personal.
• Treble
/Bass Press the right arrow button to increase the treble or
bass output; use the left arrow button to decrease the output.
Balance Press the right arrow button to increase the audio output in the
right speaker; press the left arrow button to increase the audio output in the
left speaker.
Sound Type Press the right arrow button to scroll through the available
audio types which control the way the sound comes through your speakers:
• MONO Plays the sound in mono only. Use this setting when
receiving broadcasts with weak stereo signals.
• STEREO Splits the incoming stereo audio signal into left and right
channels.
• Enhanced (only available for analog signals) Makes the sound
simulate surround sound.
Note: Most TV programs and recorded materials have stereo audio.
The word STEREO appears on the channel banner when you tune to a
program that is broadcast in stereo.
SAP (Second Audio Program) (only available for analog
broadcasts) Plays the program’s audio in a second language, if one is
available. The TV displays the word SAP in the channel banner when you
tune to a program that is broadcast with SAP information. SAP audio is
broadcast in mono. SAP is also used to broadcast a program’s audio with
descriptions of the video for the visually impaired. Press the right arrow
button to turn SAP on or off.
SOUND
Go Back
Tone Control < > ...
Balance -----|--------
Sound Type STEREO...
SAP
Auto Vol Level
Graphics contained within this publication are for representation only.
SOUND
Go Back
Tone Control < > ...
Balance -----|--------
Sound Type STEREO...
Auto Vol Level
Def. Language Spanish...
Cur. Language English...
SOUND menu for analog signals.
SOUND menu for digital signals.
ANTENNA
button