Filter
Top Products
12
Event Timer
1. Press and hold the SETUP (S) key for 2-3 seconds
until the LCD display shows the Setup Mode? Screen.
2. Release the SETUP (S) key.
3. Press and release the MACRO (M) key. The Macro Key?
Screen is displayed
4. Press and release the SETUP (S) key. The Macro X Clear?
Screen appears in the display. Note: To cancel at this point,
press and release the CLEAR key.
5. Press and release the ENTER key to clear ALL the
Macros. The Clearing Wait Screen appears in the display.
6. The LCD display shows the Success Screen, then returns
to the normal time display. Deletion of ALL SmartMacros
is now complete.
5. Press and release the SETUP (S) key. The Macro X Clear?
Screen is displayed.
Note: If you are in the process of deleting a SmartMacro
and you decide not to delete it, you can cancel the deletion
process by pressing and releasing the CLEAR key.
6. Press and release the ENTER key to delete the selected
Macro. The Macro X Clearing Screen is displayed.
7. The LCD display shows the Success Screen, then returns
to the normal time display. The SmartMacro deletion is
now complete.
To delete ALL SmartMacros that have previously been programmed, follow these steps:
Delete ALL SmartMacros
The Event Timer allows you to set your RCU807 to turn a component (TV, VCR, AUDIO, etc.) on
or off at the preprogrammed time. For example, you can set your AUDIO equipment to turn music
on, set your TV to turn off at a certain time, or set your VCR to turn on and record. Up to four
timer events can be set. However, events you program happen only once, on the day you set them.
You cannot set events for future days; they must be on the current day. After setting up your
Event Timer, be sure to leave the remote pointed at the component(s) you have set it to control.
Note: The RCU807 also has a SLEEP (ZZZ) key, which can be used to activate the Sleep function in
your TV, if equipped with this feature. You may want to try this before setting up an Event Timer
to turn off your TV after a certain time.
To set an Event Timer, follow these steps:
1. Press and hold the SETUP (S) key for 2-3 seconds
until the LCD display shows the Setup Mode? Screen.
2. Release the SETUP (S) key.
3. Press and release the SETUP (S) key repeatedly
until the Timer 1 Mode? Screen appears.
4. Press and release the desired component key
(TV, VCR, SAT•CBL, AUX1, etc.).
5. The Timer Key? Screen is shown. Press and release the key
you want to set to activate after a certain time delay. For
example, to set your VCR to record, press and release the
VCR component key in step four, then the RECORD key.
Note: Any incorrect keypress results in
the Invalid Screen being shown in the display.
Set an Event Timer
Delete a Single SmartMacro (continued)
RCU807US_IB_REVB 9/26/03 10:18 Page 12