Roadmaster VR500CS-BT Car Stereo System User Manual


 
Bluetooth Connection
13
10. Recently Received Calls
After connecting with cell phone;
1. Press the “PHONE” button.
2. Press and hold the Volume Knob until you
see “OUT NUM”, then press the Volume
Knob until the display shows “IN NUM”.
3. Press and hold the Volume Knob and the
display will show the most recent received
call.
4. Rotate the Volume Knob to choose
among the 10 recent received numbers.
5. Press the Green “Phone” button to dial
the displayed number.
11. Speed Dial
You can save up to 10 phone numbers in
memory for Speed Dialing.
1. Press the “PHONE” button.
2. Press and hold the Volume Knob until
you see “OUT NUM”.
3. Next press the Volume Knob to cycle
through to “ADD NUM”.
4. Press and hold the Volume Knob and the
display will show “NAME *”.
5. Use the Volume Knob to choose letters
to compose name of up to 16 characters.
Press and hold Volume Knob to confirm.
6. The display will show “NUMBER *”. Use
the number buttons on the faceplate or the
remote control to enter a telephone number
of up to 32 digits.
12. Speed Dialing a Phone Number
1. Press the “PHONE” button.
2. Press and hold the Volume Knob until
you see “OUT NUM”.
3. Then press the Volume Knob to cycle
through to “FIND NUM”.
4. Press and hold the Volume Knob and the
display will show your saved name.
5. Use the Volume Knob to choose the
name and press the Green “PHONE” But-
ton to call someone easily.
13. Disconnecting the Phone
Press and hold the Volume Knob until you
see “OUT NUM”, then press the Volume
Knob to cycle through to “DIS CONN”.
Press and hold to disconnect the current
phone call so that you can connect with an-
other call.
14. Ringtones
1. Press the “PHONE” button.
2. Press and hold the Volume Knob until
you see “OUT NUM”.
3. Then press the Volume Knob to cycle
through to “MELODY”.
4. Press and hold the Volume Knob and the
display will show MELODY 1.
5. Rotate the Volume Knob to choose from
MELODY 1 to 6 as different incoming music
tone in the car radio.
6. Press and hold the Volume Knob to
confirm after your desired Ringtone is dis-
played.
15. Auto Re-Connect
This unit has an “Auto Re-Connect Func-
tion”. In case the connected cellphone is
out of range (e.g. the user leaves the car for
lunch), the unit will automatically connect
with the cell phone upon returning so that
you do not have to re-set the connection.
16. BT-PLAY Stereo Transfer
The BT-PLAY function is for listening to mu-
sic on the VR500CS-BT via Bluetooth from
your cell phone. Play the music in the cell-
phone, then choose the option of “play via
bluetooth” in the cellphone.
Then press the MODE button in the radio
until the display shows “BT-PLAY”. Note:
BT-PLAY mode will only be displayed when
you have activated the Bluetooth function
on your cellphone. You can now listen to the
music from the cellphone through the car
speakers.
NOTE: It’s highly recommended that BT-
PLAY mode should not be used simultane-
ously with PHONE mode. Please quit BT-
PLAY mode before attempting to make a
phone call, unexpected results may occur,
depending on different cellphone models.