Filter
Top Products
English - 109
Using TV Guide On Screen
TM
1
If you want to set up the TV Guide On Screen
TM
now, select
“Set up TV Guide On Screen now“. For more information, refer
to INITIAL GUIDE SETUP in the TV Guide Manual.
2
If you want to set up TV Guide On Screen
TM
later and want the
reminder screen to be displayed each time you turn your TV
on, select “Remind me to set it up later”.
This option will return you to watching TV.
3
If you don't want to set up TV Guide On Screen
TM
now and
also don't want the reminder screen to be displayed each time
you turn your TV on, select “Don't remind me again”.
“Don't remind me again” will return you to watching TV and
stops the reminder screen from appearing upon power On.
Even if you select “Don't remind me again” or close the screen
by pressing the EXIT or TV Guide button, you can set up TV
Guide On Screen
TM
any time you want by pressing the TV
Guide button on your remote control.
NOTES
• Press the EXIT or TV Guide button on the remote control to close
the Reminder screen without selecting any icon. The Reminder
screen will disappear.
• In order for the Guide to receive channel lineup& listings
successfully, “Auto Program” must be performed at least once,
prior to powering off your TV. The Guide displays the very
channels that are programmed during “Auto Program”.
•Once you set up TV Guide On Screen
TM
, the TV Guide will be
displayed each time you power your TV on. If this bothers you,
you can make a change to the factory default (AUTO GUIDE) so
that the TV Guide will be displayed only when you press the TV
Guide button on the remote control by following the steps below.
1. With the TV Guide On Screen
TM
displayed on your TV, highlight
SETUP in the TV Guide menu then press the ENTER button.
2. Highlight Change default options then press the ENTER button.
3. Highlight General defaults then press the ENTER button.
4. Highlight Auto Guide then press the left or right arrow key to
select “Off”.
5. Highlight done then press the ENTER button.
• Refer to TV Guide On Screen
TM
manual for details.
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the POWER button on the front panel.
When turning the TV on for the first time, the TV Guide screen will
be displayed.
Reminder Screen
To make a selection, use the up or down arrow key to highlight an
option, and press ENTER:
BP68-00489A-03(108~125) 8/26/05 10:27 AM Page 109