Filter
Top Products
Adjusting Your LCD Monitor - User Controls
User's Guide T 30
Direct-Access Features let you display Monitor Adjustment Menu by simply pressing Auto button once.
Or they are used to adjust monitor functions. You need to activate functions other than Auto Adjustment
only when Auto-Access Features are off.
Automatic Save | OSD Lock/Unlock | Volume | Channel
1. Automatic Save
The monitor display becomes more stabilized if adjusted by Auto
Adjustment functions when the monitor is installed for the first time. Try
Auto Adjustment before attempting Manual Adjustment. Ensure the clock
frequency of the monitor matches that of the computer video card before
carrying out Auto Adjustment.
When the Auto button is pressed, the monitor screen turns black and the
Auto Adjustment screen appears as shown in the animated screen on the
left.
To make the automatic adjustment function sharper, execute the 'AUTO' function while the
AutoPattern.exe is on.
2. OSD Lock/Unlock
This function allows you to secure the current settings so that they cannot be
inadvertently changed.
With the OSD screen off, push and hold the Menu button for at least 5
seconds to lock or unlock the controls.
The following functions are available even while the OSD menu is locked.
1. Control buttons Source button(PC, PIP , Video, Audio mode button),
Volume button, Channel button, Menu button, Exit
button, Auto button
2. PC Screen Brightness, Contrast
3. TV Screen Channel, Volume
With the OSD screen off, push and hold the Menu button for five or more seconds to unlock the OSD
settings.
This function is activated by pressing the Menu button on the front panel of the monitor.
(It is not available by pressing the Menu button on the remote controller.)
3. Volume
When OSD is not on the screen, push the VOL - / VOL + button to
adjust volume.
1. Push the button to decrease the volume.
2. Push the button to increase the volume.