Sanyo FXD-780RDS Car Stereo System User Manual


 
GB5
GENERAL OPERATION
1
23456
AUDIO
MUTE
RPTSHF
REL
BAS-X
ATP
CDC
POWER
-
-
DISC
-
+
TUN
TRK
SCAN
AFAF
FM/AM CD RECEIVER FXD-780RDS 50W x 4
VOL
TURNING THE POWER ON......................................1
Install the front panel and press the PWR MUTE button 1 when ACC is on.
TURNING THE POWER OFF ............................................................. 1
Press the PWR MUTE button for more than 2 seconds. Display will revert to clock indication.
VOLUME LEVEL CONTROL.......................................2
Rotate the VOL dial 2 to adjust the volume level.
MUTING THE SOUND .......................................................................... 1
Press the PWR MUTE button 1 while the receiver is on. While muting the sound, the MUTE indicator
on the display is blinking. To restore the previous volume level, press PWR MUTE button again.
SETTING THE CLOCK..................................3, 2, 6, 8
The clock uses a 24-hour display system.
1.Press the AUDIO button 3 for more than 2 seconds.
2.Press the following buttons to set the clock.
VOL dial 2 : Adjust the hour and minutes.
TUN/TRK 8 : To activate Hour blink.
TUN/TRK 8 : To activate Minute blink.
BAND ATP 6 : Adjust the minutes to zero.
(Example) 12:2912:00
12:3013:00
3.Press the AUDIO button 3 to activate the clock.
CT(Clock Time) select....................................................................... 5
Press the TA AF button 5 while the clock indicator flashes in order to select or deselect the CT if so
desired. (The CT function is initially set to ON when shipped)
The CT function of the RDS enables the built-in clock in the unit to automatically synchronize with the CT
data. When you select CT ON, the clock is automatically adjusted to the local time transmitted by an RDS
station.
Notes
The CT function may not work even though an RDS station.
The time set by the CT function may not be accurate.
1
3
4
256
7
8
780RDS/CDC_body 8/20/02, 5:58 PM5