Filter
Top Products
35
Editing the Text
The SETUP menu will be displayed
when SSP is held down while the
power is in
“OFF” position. Turn
the MULTI SELECTOR to select
the OPENING TITLE. You can
enter the character at the flashing
cursor position. The character
selection method is described
below.
1 Enter the character to PRESET1,
2 and 3. Press the MULTI
SELECTOR up or down to select
the character, and press the
MULTI SELECTOR right or left to
move the cursor.
• PRESET1: Alphabet input (A-Z)
• PRESET2: Number
• PRESET3: Space, Deletion
2 After selecting the character,
press the MULTI SELECTOR right.
The cursor moves to the right, so
you can edit the next character.
(Maximum number of characters
for entry is 16.)
To choose and delete the
character or text, choose the
character with the cursor and then
press PRESET3 to delete.
3 After character entry, press the
MULTI SELECTOR in the center
to register the text string.
If the cursor is positioned on the
16th character, press the MULTI
SELECTOR to the right to register
the whole text entered.
New Message Display
The next time the ACC is
switched on, the text edited by
the user will be displayed.
NOTICE
To avoid draining the battery,
do not leave the car audio on
longer than necessary when
the engine is not running.