Filter
Top Products
Adjustment tips and functions
38
The extended menu “Advanced Menu”
To get into the extended menu “Advanced Menu”:
̈ From the main menu, select “Advanced”.
Setting receiving frequencies for the frequency bank “U”
Via the “Tune” menu item, you can set a receiving frequency to be stored
in the current channel or you can select a different channel in the
frequency bank “U” and assign this channel a receiving frequency.
Setting a receiving
frequency for the
current channel
̈ Set the desired frequency.
Squelch
Easy Setup Setup
Frequency Preset
Name
AF Out
Equalizer
Auto Lock
Advanced
Exit
Menu
Tune
Guitar TunerSetup
Pilot Tone
LCD Contrast
Reset
Software Revision
Exit
Advanced Menu
When you have selected one of the system banks and then select
the “Tune” menu, the receiver automatically switches to channel 1
of the frequency bank “U”. In this case, “U.1” briefly appears on the
display panel.
Upon delivery, the channels of the frequency bank “U” are not
assigned a receiving frequency.
It is vital to observe the notes on frequency selection on page 42.
̈ Press the UP/DOWN button until the “Tune” menu item
appears.
̈ Press the SET button.
The frequency selection appears.
̈ Press the SET button.
Your settings are stored.
You are back to the operating menu.
SET
“Stored”
Advanced Menu
531.375 MHz
Tune
Tune
B.Ch: U. 1
531.375 MHz
B.Ch: U. 1
534.208 MHz
Tune
Call up “Tune” Select the MHz value
and confirm
Select the kHz value;
store the setting
SET SET
SET
PEAK
-10
0
40
25
10
-20
-30
AF
RF
PEAK
-10
0
40
25
10
-20
-30
AF
RF
PEAK
-10
0
40
25
10
-20
-30
AF
RF
SET