Sharp CP-SW1000H Car Speaker User Manual


 
E-4
ENGLISH
9
CP-SW1000H
Preparation for Use
Subwoofer preparation
Select from three installation methods according to the preferred
position.
Notes:
When attaching the spikes, place the subwoofer on a cushion or
soft cloth to avoid damage.
The subwoofer can be leveled by adjusting the spikes.
Caution:
When using these spikes on glossy or slippery table such as on glass
top, this subwoofer may slip and fall off the table.
Note:
When attaching the foot cushions, place the subwoofer on a cushion
or soft cloth to avoid damage.
Placing the subwoofer
Installation image:
Place the subwoofer as shown.
Notes:
As the bass sound from the subwoofer is omni-directional, you
can place the subwoofer anywhere you like. However, it is
recommended to place it as close to the TV as possible.
The front panel of the subwoofer is not removable.
Caution:
Do not change the installation direction when the subwoofer is
turned on.
Do not allow any objects to fall into or to be placed in the bass
reflex ducts.
Do not stand or sit on the subwoofer as you may be injured.
Magnetically shielded speakers
The subwoofer can be placed near a TV set as the built-in speakers
are magnetically shielded. However, uneven colours may appear on
the screen depending on the type of TV.
If colour variation occurs.
Turn off the TV (from the power switch).
After 15 - 30 minutes, turn the TV on again.
If the colour variation is still present.
Move the subwoofer further away from the TV.
Do not place the unit near any kind of magnet or an electromagnet
as irregular colours may appear on the TV screen.
Make sure to unplug the AC power lead before installing the main
unit or changing the position.
Horizontal position
1 Tighten all spikes as shown
Using spikes
Using foot cushions
1 Attach the foot cushions as shown
Stand
1 Place subwoofer stand as shown
Vertical position
VCR
DVD player
DVD playerVCR
TV