Filter
Top Products
14
Audio menu
Audio
AV mode
SRS TS HD
Sound adjust
Bass enhancer
Clear voice
Reset
Sound adjust
Selected item
c button d button
Treble
For weaker treble For stronger treble
Bass
For weaker bass For stronger bass
Balance
Decrease audio from
the right speaker
Decrease audio
from the left speaker
SRS TruSurround (TS) HD™
You can enjoy SRS TruSurround HD™ sound, the same
as you were in movie theatre.
Using SRS TS HD on the menu screen
You can produce SRS TruSurround HD™ effects from
the “Audio” setting.
Selected item Description
On
SRS TruSurround HD™ creates a high
quality surround sound experience,
when watching DVD movies and TV
programmes broadcast in surround sound.
Off
Outputs the normal sound.
Bass enhancer powered by SRS Labs, Inc.
This function allows you to enjoy bass-enhanced sound.
Selected item Description
On
Bass enhancer function is on.
Off
Outputs the normal sound.
Clear voice
This function emphasises speech against background
noise for greater clarity. (On, Off)
NOTE
• Clear voice only work when SRS TS HD is “On”.
• For resetting all “Sound adjust” items to the factory preset
values, press a/b to select “Reset”, press ENTER, press
a/b to select “Yes”, and then press ENTER.
ECO menu
ECO
No signal off
No operation off
No signal off
You can set the TV to automatically power off in about
15 minutes after the TV goes into a state of receiving no
programme signals. (Enable, Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
NOTE
• When a TV programme finishes, and the TV receives signal
input, this function may not operate.
No operation off
You can set the TV to automatically power off when no
TV operation is performed for more than 3 hours.
(30 min., 3 hr., Disable)
• Five minutes before the power shuts down, the remaining
time displays every minute.
Setup menu
Child lock
Audio return channel
HDMI auto view
Quick start
Text language
Setup
Auto wide
Digital setup
Link operation
4
Child lock (ATV and DTV input mode only)
Allows you to use a password to protect certain settings
from being accidentally changed.
Setting a password
1 Repeat steps 1 to 2 in Menu operation.
2 Press a/b to select “Child lock”, and then press
ENTER.
3 If you already set the password, enter it here.
4 Press a/b to select “Change password”, and
then press ENTER.
5 Enter the 4-digit number as a password using
0 — 9.
6 Enter the same 4-digit number as in step 5 to
confirm.
NOTE
• To view a locked channel you must enter a password. When
you select a locked channel, “Child lock has been activated”
is displayed.
• Press ENTER to display the password input window.
LC60LE650X_EN_book.indb 14LC60LE650X_EN_book.indb 14 7/18/2013 8:52:21 AM7/18/2013 8:52:21 AM