Filter
Top Products
26
E
Monitor Settings
SETUP Menu Details
Position
Menu Position
When the monitor is used in portrait orientation (power/menu
button on the top), this icon moves the display position of the
menu screen to the bottom of the screen.
Mode
Mode
Normal
This mode is suited to normal PC screen display.
Pen Writing
This mode is suited to pen writing position.
Game
This mode is suited to video games.
Multimedia
This mode is suited to video playback.
User
The user can adjust the image quality.
Brightness
Brightness
This icon adjusts the brightness of the backlight.
Other
Other
n
Video input
RGB Range
This setting congures the range of the RGB input signal.
Use “Auto” for normal operation. If the range cannot be set
correctly in “Auto”, adjust to match the video. Varying the
setting may cause oating blacks or reduced gradations to
appear.
DisplayPort Mode
This setting congures the DisplayPort mode.
Use “DisplayPort Mode1” for normal operation.
If the following symptoms occur in “DisplayPort Mode1”, set
the mode to “DisplayPort Mode2”.
• The video is interrupted, ickers, or is not displayed.
Signage
Set to “ON” if using the monitor in a signage application
(controlled using e-Signage (optional)).
n
Mode on Start Up
Touch Mode
This setting congures the touch action mode (See page 25)
used when the monitor is turned on.
Reset: The monitor starts in nger/pen mode.
Save: The monitor starts in the mode that was last used.
Menu Position
This setting is used to set the position of the menu at startup.
Reset: Sets the display position of the menu at startup to
“Bottom in Portrait Orientation”.
Save: Sets the position to that when power was last turned
off.
Pen Position Adjustment
This setting adjusts the pointer position if the pen tip position
is different than the pointer indicator position.
n
Display Settings
Mark Indicators
Touch mark: This setting congures how to display the touch
mark (See page 28).
Key Mark: This setting congures how to display the key mark
(See page 28).
Mark Position: This setting congures the display position
of the status display mark (touch mark/key mark) on the
screen.
LED Status
This mark toggles the power LED on/off.
TEMPERATURE ALERT
Selects the notication method for an abnormal temperature.
OSD & LED: When an abnormal temperature is detected,
the power LED ashes in red and green
alternately and the screen displays a
message: TEMPERATURE.
LED: When an abnormal temperature is detected,
the power LED ashes in red and green
alternately.
OFF: Do not notify about an abnormal temperature.
Logo Screen
This setting congures whether or not to display the
logo screen during startup.
Language
Language
This setting changes the menu screen display language.
Reset
Reset
This setting resets all settings to their factory default.