Sharp XL-DH350NH Car Stereo System User Manual


 
04/1/28 XL-DH350NH EN.fm
14
Listening to USB mass storage
device/MP3 player (continued)
Notes:
This product can play WMA and MP3 files. It will automatically
detect the file type being played. If unplayable file is played on
this product, “NO SUPPORT” is indicated and the file will be
automatically skipped. This will take a few seconds. If abnormal
indications appear on the display due to the unspecified file, turn
off the unit and then turn it on again.
This product relates to USB mass storage devices and MP3
players. It may however face some irregularities due to various
unforeseen reasons from some devices. Should this happen,
turn off the unit and then turn it on again.
The USB port is only intended for direct connection to a USB
memory device without any cable.
Advanced USB playback
The following functions are the same as CD operations:
Page
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Random play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Note:
If USB memory device is not connected, “NO MEDIA” will be shown
on the display.
Auto power on function:
When you press any of the following buttons, the unit turns on.
USB button on the remote control: The unit turns on and the
“USB” function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TUNER, USB, AUDIO IN, iPod).
Notes:
This unit only supports “MPEG-1 Audio Layer-3” format.
(Sampling Frequency is 32, 44.1, 48kHz)
Playback order for MP3 files may differ depending on the writing
software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put “.MP3” “.WMA” extension. Files
cannot be played back if there is no MP3/WMA extension.
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to 32
characters.
Maximum total number of MP3/WMA files is 1024. Maximum
total number of folders is 255 inclusive of root directory.
The display playback time may not be displayed correctly when
playing back a variable bitrate file.
The ID3TAG information supported are TITLE, ARTIST and
ALBUM only. Title name, artist name and album name can be
displayed by pressing the DISPLAY button during file playback or
pause mode.
WMA meta tag also supports title, artist and album name which
are recorded in WMA files. Copyright protected WMA files cannot
be played back.
Listening to the radio
Auto power on function:
When you press any of the following buttons, the unit turns on.
TUNER (BAND) button (remote control only): The unit turns on
and the “TUNER” function is activated.
/ button on the main unit: The unit turns on and playback of
the last function starts (CD, TUNER, AUDIO IN, USB, iPod).
Notes:
When radio interference occurs, auto scan tuning may stop
automatically at that point.
Auto scan tuning will skip weak signal stations.
To stop the auto tuning, press the TUNING ( or ) button again.
When an RDS (Radio Data System) station is tuned in, the
frequency will be displayed first, and then the RDS indicator will
light up. Finally, the station name will appear.
Full auto tuning can be achieved for RDS stations “ASPM”, see
page 16.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to select stereo mode and “ST”
indicator will be displayed. “ ” will appear when an FM
broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND) button to
extinguish the “ST” indicator. The reception changes to
monaural, and the sound becomes clearer.
Tuning
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING ( or ) button on the remote control to tune
in to the desired station.
Manual tuning:
Press the TUNING ( or ) button repeatedly to tune in to
the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more than
0.5 seconds, scanning will start automatically and the tuner
will stop at the first receivable broadcast station.
CD
USB