Filter
Top Products
SV1 Receiver User and Installation Guide
27
-T A +S
-RE +T
2. The satellite signal strength screen will be
displayed. Using the channel up and down
buttons, you can display the terrestrial signal
strength screen.
3. A 6 segment horizontal bar graph will be
displayed with a “-“ sign to the left and a “+” sign
to the right. The SAT screen indicates the
satellite signal strength while TER screen
indicates the terrestrial signal strength, if a
terrestrial signal is available.
To exit the Signal Level menu, press the MENU
button.
Factory Default
The Factory Default option will restore most every
feature of the Receiver to the original factory
settings. The following is a list of all features
affected by the Factory Default option:
• All Presets are cleared
• Receiver set to Normal Tuning Mode
• Display brightness set to 50%
• Display Contrast set to 50%
• FM Transmitter set to On
• FM Frequency set to 88.1 MHz
Note that the Parental Control feature is not
affected by the Factory Default option. If a code
has been set for the Parental Control feature, the
code will not be reset by the Factory Default feature,
preventing someone from circumventing the
Parental Control feature. Channels which have been
locked will remain locked. To activate the Factory
Default feature, and restore the features of the
Receiver to the factory defaults, do the following:
1. Use the channel up and down buttons to display
the “Factory Default” menu option, and press
the select button.
2. Use the channel up and down buttons to display
“Yes” to restore all settings to the settings from
the factory, or display “No” to leave them as-is